Thursday, July 18, 2019

The Causes of Washing Machine Dryers Are Not Rotating

Using a washing machine is indeed a very common thing. This is because the washing machine helps wash clothes quickly and does not require much human labor. Washing machines can do some common work such as washing with human hands, such as blasting dirty clothes with water, washing clothes with soapy water, rinsing twice and drying. So when the engine has stopped working, the clothes are dry and can be dried manually.
The Causes of Washing Machine Dryers Are Not Rotating
Of course all that sophistication is also very much related to the type and model of the washing machine you are using. So make sure you follow the tips for choosing a washing machine before buying it. You can buy a machine with a top door, side door or two-door model. Whatever the machine needs to work until it dries the clothes before it's finished. But almost all engine models can experience problems such as the engine does not rotate when drying. Then what causes washing machine dryers not to spin and the solution? Follow the guide below.

Cable breaks because it is eaten by mice
One of the conditions that is very dangerous for washing machines is when rats enter the washing machine. Usually rats enter through the openings of the engine when there are no humans, or infiltrate through the drain pipe. At that time the mouse will stay inside and usually damage and eat the cable inside. So the machine dryer might not work because the cable breaks. Now don't worry because there is a solution, namely:

Reconnect the broken cable section by looking at the appropriate color. Or if you don't understand then use a washing machine service. The second way is to diligently clean the inside of the washing machine and install a mouse trap near the washing machine. Make it a habit to close the engine door so that mice do not enter and do a way to repel mice at home.

The capacitor is burning or damaged.
If the drying machine does not want to spin then it can also because the capacitor has been damaged or burned. This is a very understandable thing because of a man-made washing machine even with the help of technology. Finally the machine that is used continuously makes the capacitor not strong until it is damaged or burned. Signs when the capacitor is damaged or burned, it usually makes the engine only buzzing as it will spin but not spin.

The solution is to replace it with a new capacitor. But before long capacitors must be taken to be observed. You can get the same brand with the same capacity and current. This solution is one way to repair a common washing machine.

The dryer brake strap is broken or broken
Another problem that makes washing machine dryers not work is because of a broken or broken brake strap. Usually the brake rope functions to create an automation system when the dryer works properly. But when it's broken, the brake straps don't work and the engine won't spin. You can test whether there is this damage by manually turning the engine. If it is heavy, there is definitely a problem with the dryer brake strap.

The solution is to check the engine dryer brake strap, if it is still dragged, replace it with a new one. After that, check again if it is functioning normally. And this condition can be caused by ropes tightened by mice because if the engine is near the bathroom then do tips on cleaning the bathroom so that it is safe from mice.

The engine dynamo is damaged or burned
The main driver of the washing machine is dynamo with a strong enough power. If there is a dynamo part of the engine that is damaged or burned, then the engine usually cannot work properly. Damage to the dynamo will not only make the dryer die, but all engine work is not normal. This damage can occur when the dynamo part is exposed to water droplets continuously. Finally the dynamo will shorten until it burns or breaks. The solution is to repair the dynamo. The repairman will usually replace the new dynamo. And do how to clean the washing machine so that this section is always clean of water.

The timer's part of the dryer is broken
Other damage can also occur because the part of the dryer is damaged so it does not want to spin like a normal machine. This condition often occurs because the spring on the washing machine is worn or worn. Timers are usually also the part that ants and cockroaches often like so they cause damage. If this happens, the machine usually only lives buzzing but does not work. The solution is to replace the new timmer according to your washing machine brand.

The door switch is broken
Door switches are parts that are close to timers or united with timers. When this part is damaged it will make the engine not work normally. This damage usually occurs because there is water entering the channel. If the machine has worked with the sensor, the water will damage the sensor. If it's like this, try to dismantle the part that is close to the door switch. Then clean and dry with dry paper. If you still can't, take it to the service center of your washing machine.

Uneven floors
The cause of the drying machine does not want to work on the washing machine not only because of the machine itself but also outside influences. One way is when the floor surface of the washing machine is uneven. When the floor is not flat, make the drying sensor part off and not get strong pressure so that the dryer does not run. A sign that this damage is happening is that the machine only works for washing but does not dry out.

That is all the cause of the washing machine dryer does not spin and the solution. Basically the cause of this damage is seen in general so that sometimes not all machines have the same damage. So it's important to repair the engine with engine service services according to the washing machine brand.